Welcome: Shaanxi Watar Biotechnology Co.,Ltd
Home      Milk Test Kit     2 in 1 Test Kit       SC037 Russia Federation Regulation/ beta
  • SC037 Russia Federation Regulation/ beta lactams and Tetracyclines Combo Rapid Test Kit
  • SC037 Russia Federation Regulation/ beta lactams and Tetracyclines Combo Rapid Test Kit
SC037 Russia Federation Regulation/ beta lactams and Tetracyclines Combo Rapid Test Kit SC037 Russia Federation Regulation/ beta lactams and Tetracyclines Combo Rapid Test Kit

SC037 Russia Federation Regulation/ beta lactams and Tetracyclines Combo Rapid Test Kit

  • Product Item : SC037
  • Category: 2 in 1 Test Kit
  • Detection Time:10min(5min+5min)
  • Detection Limit:1.5-100ppb
  • Detection Temp:25℃
  • Shelf Life:1 year
  • INQUIRY   EMAIL


beta lactams and Tetracyclines Combo Rapid Test Kit 


PRINCIPLE

The DairyPal BT is a competitive test involving two receptors in one single operation, the β-lactams and tetracyclines antibiotics in the raw milk sample compete for the antibody with the antigen coated on the membrane of the test dipstick. Then after a color reaction, when the sample is free of antibiotics, a colour development occurs at the specific capture lines, indicating the absence of the concerned analytes in the milk sample. On the contrary, the presence of antibiotics in the sample will not cause the coloured signal to appear at the specific capture lines.


APPLICATIONS

The DairyPal BT is a rapid test that detects simultaneously the presence of either β-lactam and tetracycline molecules in a raw cow / goat milk sample.


CONTENTS

12 tubes each with 1 strip of 8 reagent microwells and 8 dipsticks.
1 Microwell holder
1 Kit insert

100pcs Disposable plastic pipette


TEST PROCEDURE

1.Read the instruction attentively, choose a clean and dry place to perform the test, wash and dry your hands before starting.
2.Take the kit out of the fridge and wait until the temperature of the reagents reaches the ambient temperature.
3.Calculate how many milk samples will be tested and mark the sample tubes to identify. The milk samples should be fully liquid without any clots or deposition. The ideal temperature of milk sample is between 4 to 20.
4.Take the tubes required from the kit package, take out as many micro-wells and dipsticks as the milk samples to be tested,and make proper marks to match the milk sample.
To open a dipsticks tube, press the safety ring down, take off the ring and get the tube cap off with your thumb.
Recover the cap tightly after taking out the required micro-wells and dipsticks.
Empty one test tube then open another one.
Keep the unused micro-well caps tightly sealed. Do NOT tear off the strip of 8 microwell caps.
Use the exposed dipsticks in 1 hour.
5.Transfer 200ul of the milk samples into the microwells, inject and reject the milk sample for 5 times consecutively to homogenize the lyophilized reagent and milk sample. Start the timer.

Dip the end of the plastic pipette(MilkPal Mini pipette) tips into the milk and slowly releases the sucker. When the sucker is back into its initial position, transfer the 200µl of milk into the reagents, by slowly pushing the sucker down to the bottom.

6.Start the timer to incubate for 5 minutes at room temperature (25);

During the incubation, The receptors will detect the presence of the antibiotics in the milk sample. The reaction will take 5 minutes.

7.Dip the dipsticks into the micro-wells with the "Sample Pad " down side to the bottom.

8.Start the timer to incubate for another 5 minutes again at room temperature.

9.Then take out the dipsticks and place them laterally in a dry clean place, peel off the sample pad, interpret the result.

Use a clean nipper(or new pipette tip) to scrape gently and slowly the sample pad.

The peeling-off of the sample pad will stop the ongoing reaction of the receptors.

File the used sample pad, peeled-off dipsticks if necessary.